Are you unable to run any installed applications because of an error? If yes then there are many causes behind such type of problem. These types of errors are known as application error. An application error is seems like 

“The application was unable to start correctly (0xc0000142). Click OK to close the application.”

Complete solution to Remove Application Error

To fix this error there are two methods are given apply any one according to your preference and knowledge.

Manual Method: Under this method you have to apply some steps manually, but before applying this method make sure that you can deal with registry files of Windows. Because without having knowledge of registry database you cannot perform such method, so avoid applying such method if you don’t have the knowledge to deal with Windows registry.

If any error occurs while executing this method then it may harm your Windows PC completely, and you cannot boot your PC without formatting it.

        

Right click on the following registry entry:

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_Dlls

And click on Jump to entry…

A window called System Registry Editor will appear that allows you to edit Windows reigstry. Double click on the LoadAppInit_DLLs and alter the value from 1 to 0. Now click OK to verify the alteration and exit.

After executing the above steps reboot your PC and try to run the error showing application, it will starts normally without any error.

Alternate Method:

Manual method is dangerous so that many users applies Alternate Method, under this method you have to download application error removal tool, this software will allows user to fix any application error without need of any extra knowledge. 

Under this method you don’t need any knowledge relate to Windows registry. It is very simple to operate and through this tool you can repair any type of PC error without typing any command manually. So download, install it and run the application to scan your PC. It will automatically spot and fix any problems in your Windows registry.

Many computer hardware devices are attached to your system to make communication easy between the user and machine. They hardware devices needs drivers to run properly, and when any error occurs in these drivers then one cannot operate system properly due to an error or other trouble. To fix such type of error you have to repair your driver.     

Some errors are given bellow that may help you to understand in which part the error are actually occur.

Printer driver issues:

Errors displayed by the drivers if your printer:

• Windows Explorer has come across a problem and it needs to be close. We are sorry for any inconvenience.
• Spoolsv.exe has met across a problem and it needs to be close. We are sorry for the inconvenience.

Audio driver issues

• Errors displayed by the audio driver
• MIDI output error detected
• Then re-install the drivers for this device
• Your audio hardware unable to play files like the current file
• There is no wave device which can play files in the current format is installed

USB driver issues:

Errors displayed by the USB driver

• Windows is unable to start the hardware device because the configuration information is damaged or it is incomplete.
• The drivers is not installed for this device
• Windows is unable to initialize the device driver for this hardware

If your PC is displaying any one of the error from the given errors then it is sure that the driver of your system’s hardware get affected or damaged. Immediately apply the steps, to fix the common driver problems. You can use PC Repair Tool to get rid of driver errors, it able to repair corrupt drivers efficiently after scanning your system detecting for drivers which are not working properly. 

Through this tool fixing, updating or installing drivers is not hard, this software makes all the process very easy so that one can easily remove such types of problem through this tool.  

While executing the DISM.exe/online/Cleanup-image/Restorehealth in Windows 8.1 an error may appears “remote procedure call failed” to fix this error apply the bellow given steps:

When user tries to execute this command then you may get following errors:

1. System File Checker SFC fails to repair corrupt member file.

2. Windows Resource Protection got corrupt and was unable to fix some of them.

3. System File Checker is not working will not run and could not repair.

4. Windows Resource Protection failed to start the repair service.

If such type of error occurs then try to run the System File Checker in Safe Mode or for repairing the Windows Components for storing the DISM. Sometime when user tries to storing the DISM using the given process then scanning process can stop at 20% with the “Remote procedure call failed error while using DISM” error.

To fix it open command box and type services.msc and press Enter to open the Service Manager.

Then search for the Remote Procedure Call (RPC) service and double click on it. After it setup the startup type to Automatic and check that the service is started if it is not then press the Start Button to start it.

Double click on the Remote Procedure Call (RPC) Locater service, this is the Service Control Manager for COM and DCOM servers. For executing the object exporter decisions objectactivations requests, and distributed garbage collection for COM and DCOM servers.

After it make certain the startup type of its manual type then create the service by clicking on the Start button. This service will assist you with the software compatibility.

Restart your system and try again, if the above given process is executed successfully then all error may be fixed. If not then you need a PC Repair Tool for cleaning and optimizing the Windows registry, this tool is able to fix any type of error and make your PC fast. This tool is also very simple to apply, just download it and scan your PC for any error after some seconds it will automatically find and fix the errors. 

You may have come across of the many DLL errors while upgrading the PC operating system from Windows 8 to Windows 8.1. One of the most common errors is:

"C:\PROGRA~1\COMMON~1\System\sysmenu.dll The specified module could not be found". Here are some of the simple steps to completely get rid of this type of Run DLL errors.

Steps for fixing sysmenu.dll errorafter Windows 8.1 upgrade:

Step 1: Firstly you need to download Autoruns.

Step 2: Then you need to open the downloaded file and run the autoruns.exe from the file.

Step 3: Once the scanning is finished you need to go to the Scheduled Tasks tab from the given tabs.

Step 4: Then in the "Scheduled Tasks" find the yellow highlighted image paths that ends with sysmenu.dll. Once you get them you need to right click and delete them.

Step 5: Similarly you need to find the yellow highlighted image paths that ends with sysmenu.dll in "Everything" tab and then delete them. If it is not there in “Everything” tab then just ignore this step.

Note: when you will delete the image paths then please make sure that you are not deleting any other image paths or else there will be trouble while starting your PC.

Step 6: Now just you need to do it restart the computer and wait for five minutes. After waiting if you don’t find any sysmenu.dll errors then you have successfully removed the errors.

But still you are getting the error then PC Repair Tool is the alternative for correcting any type of DLL errors. This DLL Repair Tool efficiently scans, cleans and repairs the registry by finding out invalid paths, fonts help paths, startup programs, shared programs, file types, application paths, file association and custom controls or dead file extensions, adware and spyware that uses registry and all other dead entries throughout the registry.

This DLL Repair Tool is best registry cleaner that efficiently fixes registry problems. It works with all the Windows Operating system and scans. Windows Registry provides quick and comprehensive analysis. This registry error fixing tool only needs few easy steps for fixing invalid Windows Registry entries, correct DLL error and cleaning up of junk files. For the convenience and for insuring maximum protection of DLL file, this tool provides automatic backup when any repair is made. So you always need to restore Windows Registry to the original state using the restore button.  

Windows 8 has loads of feature and consists of mesmerizing new interface, to make it more joyable you decided to update the Windows but you have so many troubleshooting issues. But you can deal easily with these issues and unbox other features.

To get rid of some of the common issues you need to install the troubleshooter that can automatically fix common issues. For this you need to have an anti-virus and  registry cleaner for fixing the Windows 8 registry errors.

 To open the Windows update troubleshooter you need to swipe from the right edge of the screen. If you do so using a mouse, point mouse to upper right corner of the screen and click on search. Then you need to type ‘Troubleshooting’ in box and click on settings. Then you need to click to open the Troubleshooting. Then you need to click on "Fix problems with Windows Update" under tab ‘System and Security’.

One or more updates are not installed this happens due to few errors that starts due to bad timings, internet connections failure and some other reasons. To fix these problems you need to try installing the update again.

Tips: You can check the update in the PC settings. If you are at the touch pad then you need to swipe from the right edge of the screen and if you are using a mouse point then you need to use from the upper right corner of the screen. Then you need to tap or click on “Change PC settings”. You can tap and check for updates.

If you haven’t accepted the Microsoft license terms then you need to update again, review and then accept.

Enough disk space

If you don’t have enough disk space then updates cannot install in your PC. You need to check either you have enough free space available. If you don’t have much space then you can delete the internet temporary files, empty recycle bin or delete unnecessary files. To do this you can take help of the disk cleaner to do it efficiently.

To open the disk cleaner you need to swipe from the right edge of the screen and tap search. And if you are using the mouse point then from the upper right corner of the screen and click on “search”. Then you need to type on “Disk Cleaner”. Then tap or click on the “Settings” and click for “Free up disk space by deleting unnecessary files”. 

Interruption

The windows updates might get interrupted due to connection failure or you can click on cancel. In this you have to reinstall the updates. Sometimes the internet connection slow down and can lead to interruption, you can use retry to resume the updates.

Driver Update

The Driver’s update causes error while installing the drivers of the video card and other devices. These files are not compatible with Windows operating system and create errors too. 

PC Error Repair Tool helps you to remove all these types of errors as it contains everything that is needed for repairing your PC and is the best solution for Windows 8 update errors. It is very easy to use as it resolves any kind of system errors, cleans Windows registry, restore settings and most importantly acts as a guard to maintain, tune and run PC properly with maximum speed.  

What is msvcr80.dll?

The Msvcr80.dll is Microsoft C Runtime Library is required to run programs while using the Microsoft Visual Studio 2005. This file is located in the subfolder of C:\Windows which is commonly found in 626,688 or 635,904 bytes sizes.

Some of the common Msvcr80.dll Error Messages

Here are some of the examples of the common error messages that are related to msvcr80.dll file that you may come across:

 “Msvcr80.dll Not Found.”
“This application has failed to load because msvcr80.dll file was not found. Reinstalling the application may correct the error.”
“Cannot start [Application’s name]. A necessary component is missing: msvcr80.dll. Please install [Application’s name] again.”

Cause of the Msvcr80.dll Errors

This Msvcr80.dll error messages pop-ups whenever you try to run and install the application or any program.  This error occurs when you start or shut down the system. The missing or corrupt msvcr80.dll files are the reasons behind these error messages.

Resolution:

To resolve these errors messages you need to:

•    Download the missing msvcr80.dll file from the Internet: If you receive error because the msvcr80.dll file is missing in your system, then you need to download the msvcr80.dll file from the DLL download websites. You can even look for it in your Recycle Bin in case you have mistakenly deleted the file.
•    You can even reinstall the program that generates the mssvcr80.dll error: These mscvr80.dll errors appear when you run a particular application installation files. If you encounter any error only after un-installation process. To fix this error it will prompt you to reinstall of the application. This restores the missing msvcr80.dll file on your system.
•    Perform malware scan of your entire system: You can even receive the DLL errors if the PC is infiltrated by malware programs such as virus, adware, Trojan, spyware and so on.  To get rid of these issues you need to scan and clean your PC with the help of most up-to-date and latest virus and spyware removal tools.
•    You need to ensure that your system registry is clean and compact: The Registry problems may sometimes are caused by DLL errors. You may receive this msvcr80.dll error on your system if there is an invalid or corrupt entries related to DLL file and registry. To avoid this situation you need to regularly scan the system registry with the help of reliable registry cleaning tool such as PC Error Repair Tool to remove the corrupt and invalid entries from the system.

Windows registry error is one of the irritating error, if your computer showing registry errors then it is necessary to fix it as soon as possible. This type of errors is no ignorable, and if you ignore such error then after some time it may corrupt your entire computer system. So it is necessary to remove registry error immediately by applying any of the manual or automatic method. 

Registry files is not your system’s enemy, this files are actually very important part of any computer system. Registry files are the main database of any windows system, under this database all the information related to computer hardware and software are stored. By the help of registry file any system allocates and de-allocates any specific hardware of the system. All the information that is executed by user on any system is get stored in it.

As we know that registry database is store all the information executed on it so that after some time it gets huge and OS gets unable to operate it. So that it is clear that a large registry database or registry file full with unwanted information is the cause of registry error.

When windows XP registry hive problem happens, then windows won’t boot and will show one of these messages:

1-Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

2-Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE

3-Stop: c0000218 {Registry File Failure} The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or alternate

·      

How to fix Registry Hive Errors?

You can repair error showing registry file by applying either manual or using third party tool. If you want to go with the manual method then make sure that you have some knowledge about internal file structure of registry file. It is necessary because system will be corrupt if a small mistake happens during deleting unwanted registry keys.

Unable to repair registry manually! Don’t worry and use the given professional registry repair tool, this tool will makes you able to repair your registry file without any professional knowledge. Apply this tool and make your system error free.   

Windows 8 registries are categorized as one of the most complex components of the file system. With windows registries, you are not only be affected with the behavior of the operating system along with its installed programs but also it affects a piece of data which are stored on the hard drive of the system. You will notice that whenever any software get installed or gets uninstalled on the corresponding registry then the key value of the entry is created or gets deleted and with this, it affects the integrity of the windows registry service. The frequency of this operation will lead you to orphaned file traces which are present in the registry or wit broken links as this makes the file system to behave strangely. In this manner, it leads to severe slowdown or may be possible crashing of computer.

If you have your computer with broken registry issues then you may notice some symptoms when there is a normal operation of your system. Still your system gets slowed down during booting up or while shutting down or by chance it freezes up or crashes then are sure that the problem is quite possible is with the registry files. If by chance you delete some wrong things then it will make your computer to stop working completely.

However you will get various ways to clean up the registry like you can use the built in Windows 8 program or by taking the advantage benefit of Registry Cleaning Software application by the third party software seller.

Therefore for cleaning the Windows 8.1 registry, you will find an inbuilt tool which you can make use of is Windows 8 registry editor. To open the registry editor, go to the run and then type “regedit” in it and after that it will open the Registry editor on your screen. You can find for the entries here and can change and delete the registries which are of no use. However the best way to clean Windows 8.1 registry is with the Registry Cleaner software application. This is the safest and best way to find and repair the broken or damaged registry files. It has the capability to search through several places within the registry and also find new elements which could prove threatening to the performance of your system. This software aims to monitor, test and then rectify the registry libraries. This software will be the best for you as it ensures your system which does not get stuck up and hang due to invalid entries.